- Drive caddy for pelco digital sentry dssrv software#
- Drive caddy for pelco digital sentry dssrv windows 7#
- Drive caddy for pelco digital sentry dssrv series#
It is recommended that you run DS ControlPoint on a separate client to ensure optimal server and recording performance.
Drive caddy for pelco digital sentry dssrv software#
† Running client software on the server limits the server’s performance.
Drive caddy for pelco digital sentry dssrv series#
Supports up to 6 Optera IMM Series cameras.Supports up to 8 Oncam EV0-05, or EVO-12 cameras.Panoramic Motion Recording Supports up to 8 Oncam EV0-05, or EVO-12 cameras Video Decoding Supported MPEG-4 ASP H.264 Baseline, Main, and High profiles Video Standards 60 Hz capable for NTSC 75 Hz capable for PAL Video Outputs Supports up to 3 simultaneous displays using any combination of the four outputs† Maximum Resolution 3840 x 2160 per DisplayPort output (2x) 1920 x 1200 60 hz on DVI-D output 1920 x 1200 60 hz on VGA output Video System Intel HD Graphics P4700 (shared memory) For example, an 18 TB RAID system provides net storage of 15 TB One hard disk drive of the RAID 5 configuration is used for parity, reducing net storage capacity by the storage capacity of one hard disk drive. *The minimum configuration for an internal RAID 5 is three hard disk drives. RAID Level Internal RAID 5 (requires DSSRV-RAID controller card for hot-swappable drives)Įxternal Storage Pelco’s DX8100HDDI or third-party SCSI targets (requires optional DSSRV-SCSI) Internal Memory 8 GB DDR3 non-ECC RAM 16 GB DDR ECC RAM for DSSRV2-RD modelsĭSSRV2 500 GB, 4 TB, 8 TB, 12 TB, 16 TB, 20 TBĭSSRV2-DVD 500 GB, 4 TB, 8 TB, 12 TB, or 16 TB
Drive caddy for pelco digital sentry dssrv windows 7#
Operating System Windows 7 Ultimate 64-bit The actual number of cameras the server supports depends on camera settings, client activity, network bandwidth, and the available throughput of the DSSRV2. *The DS NVs database is limited to 128 cameras. Network Health and Event Monitoring Support Through SNMP and New Digital Sentry® System Information (DSSI) Utility.Compatible with DS ControlPoint for Simultaneous Monitoring of All DS Series and DX Series Products in a Single Client Interface.Supports Pelco and Third-Party IP Cameras and Network Encoders.Records H.264, MJPEG, and MPEG-4 IP Streams.Supports up to 128 IP Camera Streams up to 64 Analog Cameras*.SSD system drive, with increased read-write speeds and no moving parts, increases overall system responsiveness and reliability.4TB storage drives provide 33% more storage over DSSRV 3TB models at no additional cost systems previously utilizing two or more servers can now be built on a single server.Increased data rate of up to 350 Mbps (RAID) or 300 Mbps (JBOD) total throughput, allowing the server to support more users and play back more cameras simultaneously than previous DSSRV models.The system can be deployed solely as a network video recorder, as a digital video recorder (DVR), or as a hybrid NVR The DSSRV2 NVR functions as a stand-alone system or as part of a network of servers, monitored from the DS ControlPoint user interface. When determining the maximum number of cameras and the desired frame rate to host on each system, the number of concurrent client connections, the number of streams played back per client, and the bandwidth required for client connections must be considered. The increased data rate over original DSSRV models allows more users to play back video from the server simultaneously. The DSSRV2 NVR boasts total throughput of up to 350 Mbps (300 Mbps for JBOD models) for recording analog and IP video streams as well as playback and export through the DS ControlPoint client. Analog streams are also supported using Pelco and third-party encoders. The system is powered to support up to 128 combined IP and analog video streams, with up to 64 analog cameras supported via the optional ENC5516 direct-attached encoder. Boosted by the 4th Generation Intel Xeon processor and 8 GB of RAM, DSSRV2 NVR provides an optimal combination of processing power and reliability to meet the demands of HD video recording and playback operations. The Digital Sentry Network Video Recorder DSSRV2 NVR is optimized by Pelco to deliver the essential hardware support for the DS NVs video management software (VMS) without the extra cost or risk of integrating hardware and software. Appendix G: Installing an Optional DSSRV-SCSI Card.Preparing the Unit for RAID Controller Card Installation.Preparing for RAID Controller Card Installation.Appendix F: Installing AN Optional DSSRV-RAID Controller Card.Appendix E: Reconfiguring Monitor Resolutions.Appendix C: Connecting to ENC5416 Units.Preparing and Installing the 4-PORT Capture Card.
Preparing and Installing the 2-PORT Capture Card.Appendix B: Installing an Optional ENC5400 2-Port or 4-Port Capture Card.Appendix A: Installing an Uninterruptible Power Supply.Digital Sentry 4.2 and DS ControlPoint 1.6.